Our products are not OEM, they are only compatible parts
XGY-0625500002
XGY-0625500002
| Quantity: | |
|---|---|
Our products are not OEM, they are only compatible parts.
Small black hex-head (or cylindrical/flat-head) machine-threaded bolts with a dark matte or semi-gloss finish (blackened, phosphated, or coated for corrosion protection), featuring a “+” mark on the top of the head (typically serving as an assembly center alignment point or a mistake-proofing indicator). The threaded section features precision-machined full-thread or half-thread threads, and the bolt is short, stubby, and compact overall. It is commonly used in conjunction with components such as the Axis (drive shaft 1745526210), bearings, steel sleeves, adjustment springs, and bottle clamps, serving as the most basic fastening and positioning element in production line equipment.
Applications
1. Locking points on Krones filling valve assembly fine-tuning mechanisms, capping head clamping/lifting joints, bottle inlet ends of bottle-washing turntables, star wheel transfer points, conveyor guide rails, or various cylinder/cam follower mechanisms.
2. Typically used in positions passing through the outer rings of the aforementioned bearings, bushings, plastic spacers, or snap rings at shaft ends to securely clamp moving or stationary components to the frame or main shaft.
3. Specific installation levels, tightening torque, and anti-loosening requirements must be verified against the assembly drawings and parts lists for the specific machine model.
Functions
1. Fastening and Locking: Provides stable axial preload to prevent components from loosening, shifting, or producing abnormal noises during high-speed operation and high-frequency micro-movement.
2. Positioning and Limiting: Works in conjunction with stepped shafts, countersunk holes, or keyways to serve as mechanical hard stops or positioning references for precise assembly.
3. Convenient Maintenance: Standardized fasteners facilitate rapid changeovers on production lines, routine inspections, and the prompt removal and replacement of faulty parts.
Features
1. Compact structure with concentrated load-bearing capacity; the black surface treatment is suitable for production line environments with moisture and cleaning agents (specific material grades, such as Grade 8.8/10.9 alloy steel or stainless steel, are subject to official specifications).
2. Thread precision, head perpendicularity, and coating adhesion directly determine the smoothness of assembly, anti-loosening performance, and the component’s own fracture resistance and service life.
3. These components are subject to frequent assembly and disassembly and are prone to damage from vibration; they require regular inspection: Long-term alternating loads and cleaning can lead to thread slippage or seizing, wear on head edges, coating peeling and rust, loss of preload, or fatigue fracture of the shank.
Krones is a registered trademark. Our Bolt XGY-0625500002 is a compatible replacement part and not manufactured or endorsed by Krones. All product names, trademarks, and brands mentioned are the property of their respective owners, used only for compatibility reference.
